The Cel-Fi for T-Mobile kit is specially designed for homes or offices that need up to 13,000 sq ft of coverage and need to boost voice calls, 3G data, 4G HSPA+ data, and the new broadband speed 4G LTE data for T-Mobile. The kit contains everything that you need and setup takes less than 30 seconds with no need to go outdoors or install an antenna on the roof. Multiple Cel-Fi systems can also be combined to cover an area of up to 90,000 sq ft, and accommodate up to 60 simultaneous users. As long as you can get 1 bar of signal somewhere in your home, a Cel-Fi system will be able to amplify that and provide the coverage you need (up to 13,000 sq ft).
- Cel-Fi DUO for T-Mobile Window Unit
- Cel-Fi DUO for T-Mobile Coverage Unit
- 12 VDC external power supply (2)
- Instruction manual
Cel-Fi Home Installation Video
|Max Coverage Area||Up to 13,000 sq ft|
|Frequency||800MHz, 1900MHz, 1700/2100MHz|
|Specific Frequency (Up/Down)||824 - 849 MHz / 869 - 894 MHz, 1850 - 1910 MHz / 1930 - 1990 MHz, 1710 - 1755 MHz / 2110 - 2155 MHz|
|Power Requirements||100 to 240 VAC, 47 – 63 Hz|
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.