The Drive 4G-M RV and large vehicle signal booster Kit is the perfect addition for people who travel in RVs, Motorhomes, 5th-Wheels, and other large vehicles, and like to get away from it all while still being connected. The Drive 4G-M RV Kit features a 5-band, 50 dB amplifier, which is the most powerful mobile 4G system allowed by the FCC. The Drive 4G-M RV boosts the 2G, 3G, and 4G LTE networks from all major carriers, giving you fewer dropped calls, increased call clarity, and the fastest 4G download speeds possible. Unlike less powerful signal boosters, the Drive 4G-M RV communicates with your phone wirelessly and does not require a wired connection to your phone or for it to sit in a cradle to receive boosted signal. Additionally, because it broadcasts boosted signal to the local area, multiple phones and data devices are able to receive boosted signal at the same time.
The coverage area that you receive inside the vehicle from the Drive 4G-M RV Kit will depend on your existing outside signal strength. In areas where you get a moderate outside signal, the Drive 4G-M RV kit will provide a boosted signal up to 5 ft from the inside antenna. If the outside signal gets weaker, the coverage area will shrink, until you have to keep your phone within about 18 inches from the inside antenna in order to take advantage of the boosted signal. If you need a larger area to talk while inside the vehicle, just keep your phone near the inside antenna and use a bluetooth headset for greater mobility. Hotspots can also be left near the inside antenna and connected to via WiFi, giving you the fastest internet speeds possible.
Looking to boost WiFi in your RV? Our Hawking HAW2R1 Hi-Gain Wireless-300N Smart Repeater Pro will allow you to connect to a WiFi network up to 6 times the distance away and increase the coverage area by up to 3 times.
The Drive 4G-M RV Kit supports the Voice, 3G, and 4G LTE networks from all major carriers in North America. It does not support any WiMAX or iDEN networks. Here is a more detailed breakdown of the carriers, networks and frequencies boosted by this kit:.
- AT&T 2G, 3G, 4G HSPA+ & 4G LTE
- Verizon 2G, 3G & 4G LTE
- Sprint 2G, 3G & 4G LTE
- T-Mobile 2G, 3G, 4G HSPA+ & 4G LTE
- US Cellular 2G, 3G & 4G LTE
- All other carriers using 800 MHz, 1900 MHz, and AWS 1700/2100 MHz
Please Note: This signal booster kit will not work in most European, Asian, and African countries because the frequencies used there are different than those boosted by this equipment.
- 470108 - weBoost Drive 4G-M Mobile Signal Booster Kit
- 859913 - 6V/2A DC Power Adapter
- 311133 - RV and Trucker Spring Mount Antenna with 13.5 ft. Coax Cable
- 901104 - 3-Way Mount with Spade Stud
- 301152 - Slim Low Profile Antenna with SMA-Male Connector & 10' Coax Cable
The Drive 4G-M RV signal booster kit comes with a DC power supply. An AC Power Supply is also available: 859912 AC/DC 6V Power Supply
Installing the Drive 4G-M RV kit is very easy and can usually be done in just a few minutes. Since no part of the installation is permanent, the kit can be transferred to another vehicle as needed.
To start, mount the RV Antenna on the exterior of the vehicle using the included 3-way mount, and ensure that the antenna extends above the vehicle for a clear, 360 degree view. Run the attached cable into the vehicle and connect the cable to the amplifier's Outside Antenna port. To the Inside Antenna port, connect the inside antenna cable. Locate the inside antenna near where you'll typically be using the phone, for example, by the drivers seat or near a table where you typically sit. Power on the amplifier and you should immediately start receiving boosted signal.
|Max Coverage Area||6 Foot Radius|
|Frequency||700MHz, 800MHz, 1900MHz, 1700/2100MHz|
|Specific Frequency (Up/Down)||698 - 716 MHz / 728 - 746 MHz, 776 - 787 MHz / 746 - 757 MHz, 824 - 849 MHz / 869 - 894 MHz, 1710 - 1755 MHz / 2110 - 2155 MHz, 1850 - 1915 MHz / 1930 - 1995 MHz|
|Gain||50dB / 50dB|
|Product Specifications||Spec Sheet|
|Power Requirements||12V DC Adapter to 6V/2A DC|
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.