Dual Amplifier 3G and Verizon 4G LTE Kit

0 0
Our custom dual-amplifier kit covers all major carriers (except Nextel) in addition to Verizon's 4G LTE network.

Availability: Out of stock

Wilson Electronics

Get it Faster!

Orders placed by 4pm EST typically ship the same day.

Questions? We're here to help:

(800) 590-3564



New Kit Available:

This kit has been discontinued.  The new Wilson 461104 AG Pro Quint 70dB Signal Booster Kit - Voice, 3G & 4G LTE for all Carriers is just as powerful but only requires one amplifier and supports more frequencies.  Or, feel free to contact us with any questions.

Our custom dual-amplifier kit covers all 3G networks* and amplifies Verizon 4G LTE networks bringing you the best of both worlds.  There currently aren't any tri-band amplifiers that cover both 3G and 4G Verizon LTE so this kit combines two amplifiers and two external antennas, but then combines the inside signal so only one internal antenna is required.  

The system starts with two Wilson Multi-Band High Gain Yagi Outside Antennas (304411) that need to be mounted outside at least 10 ft apart pointing in the general direction of the cell provider's tower.  One Wilson 50' Ultra Low Loss Coax Cable (952350) connects from each yagi antenna to the outside antenna port of each amplifier. Optionally, a lighting surge protector can be inserted in each connection to protect the amplifiers from lighting strikes.  Next, one end of each Wilson 2' Ultra Low Loss Coax Cable (952302) is attached to the internal antenna port on each amplifier with the other end of the cables attaching to the -3dB ports on the Wilson 700-2300MHz Signal Splitter (859957).  The last Wilson 50' Ultra Low Loss Coax Cable (952350) is connected between the Input connector on the splitter and the Wilson Dual Band Panel Inside Antenna (301135).  

Kit Includes:

  • 1 Wilson 4G LTE 70dB Amplifier for Verizon Wireless (801865)
  • 1 Wilson AG SOHO 65 Amplifier (805045)
  • 2 Wilson Multi-Band High Gain Yagi Outside Antenna (304411)
  • 1 Wilson Dual Band Panel Inside Antenna (301135)
  • 3 Wilson 50' Ultra Low Loss Coax Cables (952350)
  • 2 Wilson 2' Ultra Low Loss Coax Cables (952302)
  • 1 Wilson 700-2300MHz Signal Splitter (859957)

* except Nextel


Wilson 4G LTE Amplifier for Verizon Wireless Installation Video

Additional Info

Additional Info

Max Coverage Area Up to 5,000 sq ft
Frequency 700MHz, 800MHz, 1900MHz
Specific Frequency (Up/Down) 776 - 787 MHz / 746 - 757 MHz, 824 - 849 MHz / 869 - 894 MHz, 1850 - 1910 MHz / 1930 - 1990 MHz
Gain 65dB / 65dB
Impedance 50 ohm
Product Manual No
Product Specifications No
Power Requirements No
FCC Notice
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.

Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.

You may also be interested in the following product(s)

Customer Reviews