SureCall Tri-Flex Amplifier for 3G & AT&T/US Cellular 4G LTE (CM-TRIFLEX-A) [Discontinued]
Availability: Out of stock
The SureCall Tri-Flex Amplifier for 3G & AT&T/US Cellular 4G LTE (CM-TRIFLEX-A) boosts the signals used by AT&T and US Cellular's lightning fast 4G LTE networks while also boosting the 2G and 3G signals from all major carriers that are used for phone calls.
- Boosts AT&T and US Cellular 4G LTE signals as well as 2G & 3G on 800 MHz & 1900 MHz frequencies
- Covers an area up to 6,000 sq ft
- Boosts both voice and data communications
- Provides a strong, reliable signal inside a building
- More than 20 times the power of your cell phone alone
- Extends device battery life
- Boosts signal for multiple devices simultaneously
The SureCall Tri-Flex Amplifier for 3G & AT&T/US Cellular 4G LTE (CM-TRIFLEX-A) is designed specifically for the AT&T and US Cellular 2G, 3G and new 4G LTE networks. Until now, most signal boosters were either dual-band and only boosted 3G and earlier signals or they were 4G LTE specific and only boosted the LTE signal which doesn't support voice calls. This amplifier combines the two so you get the lightning fast 4G LTE combined with crystal clear voice calls all in one signal booster. The amplifier's standard dual-band frequencies (850MHz Cellular and 1900MHz PCS) will boost most major cell carriers 2G and 3G networks. The additional 700MHz capability amplifies the frequencies used by AT&T and US Cellular's 4G LTE network.
The SureCall Tri-Flex requires at least two antennas and cables for installation. The outside antenna (donor antenna) receives the signal from the cell site and transmits it via a coax cable to the amplifier. The amplifier boosts the signal and routes it over another coax cable, and to the inside antenna where it is then rebroadcast into the building. The bi-directional system also operates in reverse to ensure that the signal your phone sends is powerful enough to be received by the cell tower.
The SureCall Tri-Flex Amplifier for 3G & AT&T/US Cellular 4G LTE (CM-TRIFLEX-A) features a 65 dB gain which gives it a total coverage area of up to 6,000 sq ft making this the ideal amplifier for large homes and small to medium offices. Because this is a powerful amplifier, you must have a minimum of 20 ft of vertical separation between the inside and outside antennas. Adding up to 75 feet of horizontal separation can help improve the performance of this signal booster by minimizing the potential for oscillation (feedback) between the inside and outside antennas.
|Max Coverage Area||Up to 6,000 sq ft|
|Frequency||700MHz, 800MHz, 1900MHz|
|Gain||65dB / 65dB|
|Power Requirements||Input AC110V,60Hz; Output DC 6-12V; <30W|
|Product Manual||Tri-Flex User Guide|
|Specific Frequency (Up/Down)||698 - 716 MHz / 728 - 746 MHz, 824 - 849 MHz / 869 - 894 MHz, 1850 - 1910 MHz / 1930 - 1990 MHz|
|Max Output Power||3 Watts EIRP Cellular, 2W Eirp for PCS, 3W EIRP for LTE|
|Linear Output Power (Up/Down)||No|
|Dimensions||8.5" x 6.25" x 1.5" (21 cm x 16 cm x 3.8 cm)|
Regular Price: $1,499.95
Special Price $899.00
Regular Price: $1,399.95
Special Price $1,149.95