SureCall Tri-Flex Amplifier for T-Mobile & Canadian Carriers (CM-TRIFLEX-T) [Discontinued]

0 0

The SureCall Tri-Flex-T Signal Booster amplifies the AWS signals used by carriers including T-Mobile, MetroPCS, Cricket, and all four of Canada's major LTE networks from Bell, MTS, Rogers, and Telus while also boosting the 2G and 3G signals from all major carriers that are used for phone calls.

  • Boosts AWS signals as well as 2G & 3G on 800 MHz & 1900 MHz frequencies
  • Covers an area up to 6,000 sq ft
  • Boosts both voice and data communications
  • Provides a strong, reliable signal inside a building
  • More than 20 times the power of your cell phone alone
  • Extends device battery life
  • Boosts signal for multiple devices simultaneously

Availability: Out of stock


Get it Faster!

Orders placed by 4pm EST typically ship the same day.

Questions? We're here to help:

(800) 590-3564



The SureCall Tri-Flex Amplifier for T-Mobile & Canadian Carriers (CM-TRIFLEX-T) is designed specifically to boost AWS in addition to the standard Dual-Band frequencies. Until now, most signal boosters were either dual-band and only boosted 3G and earlier signals or they were AWS specific and only boosted the AWS signal which often isn't used for voice calls. This amplifier combines the two and boosts both the dual-band and AWS frequencies making it the ideal amp for carriers like T-Mobile, MetroPCS, Cricket, and all major Canadian carriers including Bell, MTS, Rogers, and Telus.

The SureCall Tri-Flex Amplifier requires at least two antennas and cables for installation. The outside antenna (donor antenna) receives the signal from the cell site and transmits it via a coax cable to the amplifier. The amplifier boosts the signal and routes it over another coax cable, and to the inside antenna where it is then rebroadcast into the building. The bi-directional system also operates in reverse to ensure that the signal your phone sends is powerful enough to be received by the cell tower.

The SureCall Tri-Flex AWS repeater features a 65 dB gain which gives it a total coverage area of up to 6,000 sq ft making this the ideal amplifier for large homes and small to medium offices. Because this is a powerful amplifier, you must have a minimum of 20 ft of vertical separation between the inside and outside antennas. Adding up to 75 feet of horizontal separation can help improve the performance of this signal booster by minimizing the potential for oscillation (feedback) between the inside and outside antennas.

Additional Info

Additional Info

Max Coverage Area Up to 6,000 sq ft
Frequency 800MHz, 1900MHz, 1700/2100MHz
Impedance 50 ohm
Flatness No
Gain 65dB / 65dB
Isolation No
Power Requirements Input AC110V,60Hz; Output DC 6-12V; <30W
Product Manual Tri-Flex User Guide
Product Specifications No
Specific Frequency (Up/Down) 824 - 849 MHz / 869 - 894 MHz, 1850 - 1910 MHz / 1930 - 1990 MHz, 1710 - 1755 MHz / 2110 - 2155 MHz
Max Output Power 3W EIRP for Cellular, 2W EIRP for PCS, 1W EIRP for AWS
Linear Output Power (Up/Down) No
Noise Figure 7dB
Dimensions 8.5" x 6.25" x 1.5" (21 cm x 16 cm x 3.8 cm)
FCC Notice No

You may also be interested in the following product(s)

Customer Reviews