The TriFlex2Go is expected in Mid July 2014.
The SureCall TriFlex2Go-T is a mobile signal booster that will boost the Voice and 3G networks from all carriers plus the 4G LTE networks from at least one carrier. There are three TriFlex2Go amplifiers:
- TriFlex2Go-V will boost Verizon's 2G, 3G, and 4G LTE networks
- TriFlex2Go-A will boost AT&T and US Cellular's 2G, 3G, and 4G LTE networks
- TriFlex2Go-T will boost T-Mobile and Canadian Carriers 2G, 3G, and 4G LTE networks
The SureCall TriFlex2Go is a mobile professional grade cell phone signal booster that features that fastest 4G LTE data rates and a 3 year manufacturer's warranty, the longest in the industry. The TriFlex2Go is designed for Cars, Trucks, RVs, Boats, and other vehicles and features Automatic Gain Control (AGC), which allows the amplifier to continue boosting even while the outside signal strength is constantly changing. In addition to AGC, the TriFlex2Go also features manual gain control knobs allowing you to fine-tune the output power of the amplifier to work best in your vehicle. The rugged metal amplifier casing helps to dissipate heat while protecting the amplifier from bumps in the road and other objects in the vehicle.
The TriFlex2Go works by amplifying the existing cellular signal which comes in through the outside antenna and rebroadcasts it inside the vehicle using the included inside patch antenna. The entire process also works in reverse with the signal from your phone being boosted and sent back to the tower through the antenna on the roof. This provides you with clear two-way conversations and fast upload and download data speeds. The TriFlex2Go is FCC Certified and uses the latest carrier protection technologies including auto gain control, stealth technology that shuts off the uplink when it's not needed, and the lowest Out of Band Emissions to date.
The TriFlex2Go Mobile Signal Booster Kit supports the Voice and 3G networks from all major carriers in North America plus the 4G LTE networkfrom at least one carrier. It does not support any WiMAX or iDEN networks or LTE networks from any other carriers. The following carriers are supported:
- TriFlex2Go-V will boost the 2G and 3G networks from all carriers plus Verizon's 4G LTE network
- TriFlex2Go-A will boost the 2G and 3G networks from all carriers plus AT&T and US Cellular's 4G LTE networks
- TriFlex2Go-T will boost the 2G and 3G networks from all carriers plus T-Mobile and Canadian Carriers 4G LTE networks
The TriFlex2Go kit includes everything necessary for a standard installation including the following:
- TriFlex2Go Amplifier
- 5dB magnetic roof-mount outside antenna
- Inside low-profile patch antenna
- DC Power Supply with 6 ft. cable
- Screw and Velcro mounting kit
To install, mount the outside antenna on the roof of the vehicle. It should be as straight up and down as possible and try to keep it away from the sunroof if you have one. Pick the door that is used least often and run the cable in through the door opening. For best results, run the cable under the weather-stripping to protect the cable when the door is opened and closed. Connect the outside antenna cable to the Outside Antenna port on the amplifier. To the inside antenna port, connect the patch antenna. The inside patch antenna should be located near where you typically use your phone, ideally within 12 inches. Common mounting locations include the side of the drivers seat or in the center console of the vehicle. In areas with a very weak existing outside signal, your phone may have to stay within 8 to 12 inches from the inside antenna in order to receive a usable signal. Finally, plug in the power supply to power on the system. Over the first few days, you may need to fine-tune the gain controls on the amplifier for best results.
|Max Coverage Area||6 Foot Radius|
|Frequency||700MHz, 800MHz, 1900MHz, 1700/2100MHz|
|Specific Frequency (Up/Down)||698 - 716 MHz / 728 - 746 MHz, 776 - 787 MHz / 746 - 757 MHz, 824 - 849 MHz / 869 - 894 MHz, 1850 - 1910 MHz / 1930 - 1990 MHz, 1710 - 1755 MHz / 2110 - 2155 MHz|
|Gain||50dB / 50dB|
|Product Specifications||TriFlex2Go-V for Verizon
TriFlex2Go-A for AT&T & US Cellular
TriFlex2Go-T for T-Mobile and Canadian Carriers
|Power Requirements||5-15 V <9W|
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.