This kit can only be purchased and shipped to Canada. It cannot be used in the United States for boosting signal.
Wilson's 802770 Tri-Band 4G-C is the first ever consumer wireless signal booster designed specifically to boost AWS in addition to the standard Dual-Band frequencies. Until now, most signal boosters were either dual-band and only boosted 3G and earlier signals or they were AWS specific and only boosted the AWS signal. This amplifier combines the two and boosts both the dual-band and AWS frequencies making it the ideal amp for carriers like T-Mobile. The amplifier's standard dual-band frequencies (850MHz Cellular and 1900MHz PCS) will boost most major cell carriers 2G and 3G networks. The additional AWS 1700/2100 MHz capability amplifies the frequencies used by T-Mobile and many Canadian Carriers.
The Wilson 802770 requires at least two antennas and cables for installation. The outside antenna (donor antenna) receives the signal from the cell site and transmits it via a coax cable to the amplifier. The amplifier boosts the signal and routes it over another coax cable, and to the inside antenna where it is then rebroadcast into the building. The bi-directional system also operates in reverse to ensure that the signal your phone sends is powerful enough to be received by the cell tower.
The Wilson 802770 Tri-Band AWS repeater features a 70 dB gain which gives it a total coverage area of up to 10,000 sq ft making this the ideal amplifier for large homes and small to medium offices. Because this is a powerful amplifier, you must have a minimum of 20 ft of vertical separation between the inside and outside antennas. Adding up to 75 feet of horizontal separation can help improve the performance of this signal booster by minimizing the potential for oscillation (feedback) between the inside and outside antennas.
More Wilson 802770 Tri-Band 4G-C Kit Options
This kit is ideal for locations with a strong outside signal or that need to support multiple carriers simultaneously. The included omnidirectional antenna is less powerful than a directional, but it can cover multiple carriers with towers in all directions.
This kit is best for locations where the existing signal strength outside is 3 or fewer bars. The included directional antenna must be aimed so this kit can only cover the carriers with towers in a single general direction. If you have carriers with towers in multiple directions, an additional outside antenna can be added, contact us for more information.
If you already have the cables and antennas and only need the amplifier, then this is the best option for you.
|Max Coverage Area||Up to 10,000 sq ft|
|Frequency||800MHz, 1900MHz, 1700/2100MHz|
|Specific Frequency (Up/Down)||824 - 849 MHz / 869 - 894 MHz, 1850 - 1910 MHz / 1930 - 1990 MHz, 1710 - 1755 MHz / 2110 - 2155 MHz|
|Gain||70dB / 70dB|
|Product Manual||Wilson Tri-Band 4G-C Signal Booster Installation Guide|
|Power Requirements||6 V, 1.5 A - 3.0 A|
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.