The Wilson 805165 Tri-Band 4G-V has been discontinued.
Please contact us to learn about available replacement products.
Wilson's 805165 Tri-Band 4G-V is the first ever consumer wireless signal booster designed specifically for the Verizon Wireless 2G, 3G and new 4G LTE networks. Until now, most signal boosters were either dual-band and only boosted 3G and earlier signals or they were 4G LTE specific and only boosted the LTE signal which doesn't support voice calls. This amplifier combines the two so you get the lightning fast 4G LTE combined with crystal clear voice calls all in one signal booster. The amplifier's standard dual-band frequencies (850MHz Cellular and 1900MHz PCS) will boost most major cell carriers 2G and 3G networks. The additional 700MHz capability amplifies the frequencies used by Verizon's 4G LTE network.
The Wilson 805165 requires at least two antennas and cables for installation. The outside antenna (donor antenna) receives the signal from the cell site and transmits it via a coax cable to the amplifier. The amplifier boosts the signal and routes it over another coax cable, and to the inside antenna where it is then rebroadcast into the building. The bi-directional system also operates in reverse to ensure that the signal your phone sends is powerful enough to be received by the cell tower.
The Wilson 805165 Tri-Band repeater for Verizon features a 70 dB gain which gives it a total coverage area of up to 10,000 sq ft making this the ideal amplifier for large homes and small to medium offices. Because this is a powerful amplifier, you must have a minimum of 20 ft of vertical separation between the inside and outside antennas. Adding up to 75 feet of horizontal separation can help improve the performance of this signal booster by minimizing the potential for oscillation (feedback) between the inside and outside antennas.
Verizon is still in the process of deploying its new 4G LTE network. If you currently get a 3G Verizon signal, you're in luck because Verizon is adding 4G LTE to every market currently served by their 3G network. So even if you don't yet get a Verizon LTE signal, you will soon, making this tri-band LTE booster is the perfect way to ensure that you won't need to upgrade again in the near future.
Wilson 805165 Tri-Band 4G-V Kit Options
This kit is ideal for locations with a strong outside signal or that need to support multiple carriers simultaneously. The included omnidirectional antenna is less powerful than a directional, but it can cover multiple carriers with towers in all directions.
This kit is best for locations where the existing signal strength outside is 3 or fewer bars. The included directional antenna must be aimed so this kit can only cover the carriers with towers in a single general direction. If you have carriers with towers in multiple directions, an additional outside antenna can be added, contact us for more information.
As low as: $899.95
If the existing Omni and Yagi kits don't suit your needs, you can pick and choose the exact components that will work best in your situation. Feel free to contact us for assistance.
|Max Coverage Area||Up to 10,000 sq ft|
|Frequency||700MHz, 800MHz, 1900MHz|
|Gain||70dB / 70dB|
|Isolation||> 90 dB|
|Power Requirements||6 V, 1.5 A - 3.0 A|
|Product Manual||Wilson Tri-Band 4G-V Signal Booster Installation Guide|
|Specific Frequency (Up/Down)||776 - 787 MHz / 746 - 757 MHz, 824 - 849 MHz / 869 - 894 MHz, 1850 - 1910 MHz / 1930 - 1990 MHz|
|Max Output Power||No|
|Linear Output Power (Up/Down)||No|
|Noise Figure||4 dB nominal|
|Dimensions||8.875 x 6.0 x 1.5 in (22 .5 x 15 .2 x 3 .8 cm)|