The AG Pro 75 amplifier has been discontinued. It has been replaced by the Wilson 460105 AG Pro 70.
The Wilson AG Pro 75 Large Building Signal Booster Kit with Standard Omni Antenna (841280-OMNI-W) is one of our premier large building kits. It includes a high-gain omnidirectional antenna which enables the signal booster system to amplify multiple carriers at the same time. The AG Pro 75 is the largest Dual Band amplifier that Wilson makes and can be expanded through the use of in-line boosters and additional inside antennas to cover large areas. With a strong outside signal, The Wilson AG Pro 75 Large Building Signal Booster Kit with Omni Antenna will cover up to 10,000 sq ft or more with a strong outside signal. Because the system is so powerful, it requires at least 50 ft of vertical separation between the inside and outside antennas in order to avoid feedback within the system.
If you're not sure if this kit will work in your situation, please give us a call at (800) 590-3564 and talk with one of our trained technical service specialists.
This kit includes everything necessary for a typical installation. For more complex situations, please contact us to have a custom kit designed.
- Wilson AG PRO 75 Amplifier (801280)
- Wilson 50 Ohm Omnidirectional Outside Building Antenna (301202)
- Wilson 50 Ohm Dual Band Interior Panel Antenna (301135)
- Two Wilson 50' Ultra Low Loss Coax Cables (952350)
More Wilson AG Pro 75 Kits
This kit is best for locations where the existing signal strength outside is 3 or fewer bars. The included directional antenna must be aimed so this kit can only cover the carriers with towers in a single general direction. If you have carriers with towers in multiple directions, an additional outside antenna can be added, contact us for more information.
As low as: $999.95
If the existing Omni and Yagi kits don't suit your needs, you can pick and choose the exact components that will work best in your situation. Feel free to contact us for assistance.
If you already have the cables and antennas and only need the amplifier, then this is the best option for you.
|Max Coverage Area||Up to 7,500 sq ft|
|Specific Frequency (Up/Down)||824 - 849 MHz / 869 - 894 MHz, 1850 - 1910 MHz / 1930 - 1990 MHz|
|Gain||70dB / 75dB|
|Product Manual||Installation Guide|
|Power Requirements||110-240 V AC, 50-60 Hz, 8 W|
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.