The Wi-Ex zBoost SOHO YX550 is designed to boost the 4G LTE signals used by Verizon and the 3G and 4G signals used by T-Mobile so you can enjoy lighting fast data speeds in areas with a weak 4G signal. The DataBoost YX550 comes with everything needed for installation in the box and is easy to install making it ideal for homes and offices.
This is an Upgrade kit and is designed to be installed along-side a Wi-Ex zBoost SOHO YX545 to provide 2G, 3G, Verizon 4G LTE, and AWS signal boosting. For the stand-alone version, check out the YX550-VLTE-AWS page.
If you have Verizon, please note that their LTE service is not available in all areas so make sure you get an LTE signal nearby and have a 4G phone to ensure that the YX550 will benefit you. For best performance, we recommend upgrading from the basic cable that comes with the YX545 to a Low Loss RG6 Coax Cable.
|Max Coverage Area||Up to 2,500 sq ft|
|Specific Frequency (Up/Down)||776 - 787 MHz / 746 - 757 MHz, 1710 - 1755 MHz / 2110 - 2155 MHz|
|Gain||60dB / 60dB|
|Power Requirements||100-240VAC 50-60 Hz ; 5.0VDC; 3W standby; 7W max signal - 2.0A Max|
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.