CommScope 1000 ft of 400 Series Plenum Ultra Low Loss Coax Cable [Discontinued]

CNT-400P-1000

Out of stock

  • CommScope CNT-400-P-1000 is 1,000 ft of 400 series 50-ohm plenum coaxial cable that's approved for use in plenum spaces or where required by code. This cable is available in custom lengths and comes unterminated so connectors must be installed before it can be used.
  • We're happy to offer free ground shipping on all orders over $99 to locations in the contiguous United States that are placed through our website, as well as discounted expedited shipping options if you need to receive your order sooner.

    All orders sent via free shipping or ground shipping may take between 1 and 3 days to ship from our warehouse. Orders with expedited shipping that are received before 2 pm Eastern, Monday through Friday, generally ship the same day, with all others shipping the following business day. If your order contains any products that are out of stock, pre-order, or back-ordered, it may take additional time to ship.

    Quotes, purchase orders, custom orders, and orders by resellers/integrators are not eligible for free shipping.

  • We're committed to providing you with the best customer experience, so you'll never pay more with UberSignal.

    If you want to order from us, but you found a product on another site for less, then that's no problem at all. We'll match prices listed from any competitor's website or any other reputable source.

    Click here to learn more about our lowest price guarantee and how to place your order with the matched price.

  • At UberSignal, we know that everyone’s situation is different, and in some cases, it’s possible that a signal booster may not work quite as well as you had hoped

    If you’re not satisfied with your purchase for any reason, we offer a 60-day return policy during which you can return your order for a refund.

    If you would like to return a product from your order, please call us at (800) 590-3564 and we will provide you with all of the information necessary to return the item.

This is bulk cable and is not terminated with ends. It cannot be used as is and must be terminated on-site. If you are looking for pre-terminated cable that can be used out of the box, please see our Pre-Terminated CommScope CNT-400-P Cable page.

CommScope CNT-400-P-1000 is 1,000 ft of 400-series plenum 50-ohm coax cable that’s ideal for medium length runs through plenum spaces or where required by code.

A plenum is a space within a building that is used by the heating, ventilation, and air conditioning system for airflow.  Typically, it is the space above a drop ceiling, but can also be below a floor.  If you have return air vents and there is not a duct attached to the back of the return air vent, it is a plenum space and plenum cables should be used.  There are other factors that can require plenum rated cable so be sure to check with your local code enforcement officer if you're unsure.

400 series cable is a 3/8” diameter cable that works well in runs that are 10 to 100 ft long.  The CNT-400-P cable features a loss of 4.63 dB per 100 ft over the lower frequencies and 7.0 dB per 100 ft over the higher frequencies that are used for cellular communications.  For runs longer than 100 ft or where you need to maximize performance, we recommend moving up to a ½” plenum cable.

The CNT-400-P cable is white.  It should only be used indoors and away from direct sunlight since the jacket is not UV resistant and will break down after long-term exposure to sunlight.

This cable is unterminated and will come on a spool.  The cable must be terminated with the proper cable connectors before it can be used.  To properly terminate 400 series cable, we recommend the following accessories:

  • Cable Connectors/Terminations
  • LMR-400 Prep Tool
  • LMR-400 Crimp Tool

Pre-terminated cable is also available here: Pre-Terminated CommScope CNT-400-P Cable.

Bulk cable may be returned only if it is in new condition.  Any cable that has been removed from its box or spool may not be returned.

Brand CommScope
Cable Connectors None (cable only)
Connector None
Cable Type 400-Series
Impedance 50 ohm