SolidRF Home 4G Signal Booster Kit - Voice, 3G & 4G LTE [Discontinued]

RF115721-Home

Out of stock

  • Product Notice

    The manufacturer is currently undergoing a patent challenge, so we've stopped offering this product for the time being. You should choose the SureCall Fusion5s Signal Booster Kit in place of this kit.

    Go to the SureCall Fusion5s

  • We're happy to offer free ground shipping on all orders over $99 to locations in the contiguous United States that are placed through our website, as well as discounted expedited shipping options if you need to receive your order sooner.

    All orders sent via free shipping or ground shipping may take between 1 and 3 days to ship from our warehouse. Orders with expedited shipping that are received before 2 pm Eastern, Monday through Friday, generally ship the same day, with all others shipping the following business day. If your order contains any products that are out of stock, pre-order, or back-ordered, it may take additional time to ship.

    Quotes, purchase orders, custom orders, and orders by resellers/integrators are not eligible for free shipping.

  • We're committed to providing you with the best customer experience, so you'll never pay more with UberSignal.

    If you want to order from us, but you found a product on another site for less, then that's no problem at all. We'll match prices listed from any competitor's website or any other reputable source.

    Click here to learn more about our lowest price guarantee and how to place your order with the matched price.

  • At UberSignal, we know that everyone’s situation is different, and in some cases, it’s possible that a signal booster may not work quite as well as you had hoped

    If you’re not satisfied with your purchase for any reason, we offer a 60-day return policy during which you can return your order for a refund.

    If you would like to return a product from your order, please call us at (800) 590-3564 and we will provide you with all of the information necessary to return the item.

The SolidRF Home 4G Signal Booster Kit is the perfect solution for improving the cell phone signal throughout your home. If you're looking for better voice calls and faster data speeds everywhere, then look no further. The SolidRF Home 4G features the most powerful amplifier available and will boost voice calls, 3G data and 4G LTE fast data for all of the major carriers in the United States and Canada.

Kit Options

The SolidRF Home 4G kit can be purchased with either 1 or 2 inside dome antennas.

1 Inside Antenna
Most situations will only require a single inside antenna to provide boosted signal throughout the home, so if you have a standard square or rectangular shaped house, and need 1-2 floors of coverage, this would be the option for you.

2 Inside Antennas
Some situations will require more than one internal antenna to provide the necessary coverage to the whole house, such as if the house is very large, a non-standard shape, has obstructions like brick, block or concrete walls, or requires coverage over more than 2 floors. In this case, you would want an extra inside antenna to bring additional boosted signal to the area which might not receive it with one inside antenna.

Bonus
The SolidRF Home 4G kit comes with a lightning surge protector (a $69.95 value) and a J-Pipe pole mount (a $59.95 value) free of charge.

Coverage Area

The existing outside signal strength that you receive from the roof of your home or office (where you would mount the outside antenna) has a large impact on the amount of coverage area you get from a signal booster. It is important to remember that there are many factors that go into determining the coverage area, so actual results may vary from these estimates.


1 Inside Antenna Kit

  • If you have an existing strong 5-bar outside signal, you may receive up to 10,000+ sq ft of boosted signal inside the building.*
  • If you have an existing 3 to 4-bar (-85 dB) outside signal, you may receive up to 6,000 sq ft of boosted signal inside the building.*
  • If you have an existing 1 to 2-bar (-97 dB) outside signal, you may receive up to 1,600 sq ft of boosted signal inside the building.*
  • If you have no existing outside signal, then a signal booster likely will not work in your situation unfortunately.
 

2 Inside Antennas Kit

  • If you have an existing strong 5-bar outside signal, you may receive up to 20,000+ sq ft of boosted signal inside the building.*
  • If you have an existing 3 to 4-bar (-85 dB) outside signal, you may receive up to 10,000 sq ft of boosted signal inside the building.*
  • If you have an existing 1 to 2-bar (-97 dB) outside signal, you may receive up to 800* sq ft of boosted signal inside the building.*
  • If you have no existing outside signal, then a signal booster likely will not work in your situation unfortunately.
 


* If the outside signal strength is very weak (1 to 2 bars), the loss from the extra cable and antenna in the 2 antenna kit will actually produce less coverage than the 1 antenna kit. In this case, a single antenna should be connected directly to the amplifier without the splitter, and you should get up to 1,600 sq ft of coverage.

If you require more coverage than you can get from a single SolidRF Home 4G system, it is possible to use multiple kits within the same building. If you're not sure about how to cover your larger building with a boosted signal, please file out our Custom Kit Request Form and we can help design a custom solution for your building.

Supported Carriers

The SolidRF Home 4G supports the 2G, 3G, and 4G LTE networks from virtually all carriers in the United States and Canada. The following carriers are supported:

  • AT&T 2G, 3G, 4G HSPA+ & 4G LTE
  • Verizon 2G, 3G, 4G LTE & XLTE
  • Sprint 2G, 3G & 4G LTE
  • T-Mobile 2G, 3G, 4G HSPA+ & 4G LTE
  • US Cellular 2G, 3G & 4G LTE
  • All other carriers using 700 MHz, 800 MHz, 1900 MHz, and AWS 1700/2100 MHz frequencies

Geographic Availability

The SolidRF Home 4G signal booster is designed for use in the United States and Canada, though it may work in other countries that use the same frequencies as the carriers in North America. The Home 4G signal booster will not work in most European, Asian, and African countries because the frequencies used there are different from what are used in the United States.

Kit Includes

The following items are included in each SolidRF Home 4G kit option:


1 Inside Antenna Kit

  • SolidRF 4G Omni Exterior Antenna
  • 50' Low Loss 400 Coax Cable
  • SolidRF 4G 5-Band amplifier
  • 30' Low Loss 400 Coax Cable
  • SolidRF 4G Dome Interior Antenna
  • Mounting Bracket
  • Installation Guide
  • FREE Lightning Surge Protector (a $69.95 value)
  • FREE J-Pipe Pole Mount (a $59.95 value)
 

2 Inside Antennas Kit

  • SolidRF 4G Omni Exterior Antenna
  • 1 x 50' Low Loss 400 Coax Cables
  • SolidRF 4G 5-Band amplifier
  • 10' Low Loss 400 Coax Cable (from amplifier to splitter)
  • 2-Way Splitter
  • 2 x 50' Low Loss 400 Coax Cables
  • 2 x SolidRF 4G Dome Interior Antennas
  • Mounting Bracket
  • Installation Guide
  • FREE Lightning Surge Protector (a $69.95 value)
  • FREE J-Pipe Pole Mount (a $59.95 value)
 

Installation Overview

Installing the SolidRF Home 4G Signal Booster Kit system is fairly straightforward, but will require running cable from the roof or elevated location into the building, as well as potentially drilling and screwing in components. If you feel comfortable with this level of installation, then feel free to proceed, otherwise you may want to consider hiring a general contractor, electrician, satellite TV installer, or handyman to assist in the installation.

Additionally, before you begin, we recommend that you start with a soft installation, where you don't permanently mount components, drill holes or finalize cable runs until you're sure that the system is performing to the level that you would like. Once you've tested out antenna and component locations, and are satisfied with the results, then you can go ahead and permanently install everything. Finally, read through the entire set of installation instructions both here and in the included manual before beginning, and feel free to call us with any questions before you proceed.

  1. We'll start the installation from the roof and work our way into the house. First, start by determining the part of the roof that receives the best signal, as we'll want to locate the outside omni antenna there. Once you've identified the portion of the roof which is best, locate the J-Pipe which you'll be mounting the omni antenna to, as high up on the roof as possible (ideally the peak of the roof). Attach the omni antenna and run the 50 ft. cable from the antenna into the attic of the house, if possible through a vent or soffit, but you may need to drill a hole at this step.
  2. We recommend running the cables and locating the inside antenna in the attic of the house (If this is not possible, please call us to discuss other installation locations). The amplifier can either be located in the attic if there is an area with AC power, or down in the living space for easier access. Once the cable is inside the house, run the cable to the area where you plan to locate the amplifier. Attach the lightning surge protector, and then connect it to the "Outside Antenna" port of the amplifier.
    1. If you've purchased the 1 Antenna Kit, then connect the 30 ft cable to the "Inside Port" on the other side of the amplifier, and run it to the center of the attic. Connect the dome antenna and lay it down on the floor of the attic, with the small end of the dome antenna on the floor. This will allow the dome antenna to broadcast the boosted signal downwards and outwards to the living areas below.
    2. If you've purchased the 2 Antenna Kit, then connect the 10 ft cable to the "Inside Port" of the amplifier and then connect the 2-way splitter. To each side of the 2-way splitter, connect a 50 ft cable and run to the location where you plan to mount each inside dome antenna. Connect the dome antenna to each cable and lay it down on the floor of the attic, with the small end of the dome antenna on the floor. This will allow the dome antenna to broadcast the boosted signal downwards and outwards to the living areas below.
  3. Once all of the components are connected, power on the amplifier by plugging it in. As it's powering up, you should see the lights flashing, and then check to see that they turn solid green. If the lights are not solid green, check out the portion of the owners manual that discusses the indicator lights to find out what they mean. Of, you can always contact us for help.

The included manual is very helpful and we recommend reading through it before beginning the installation. If you run into any issues, feel free to contact us for help.


* The actual coverage area of a signal booster is dependent on many factors including existing outside signal strength, obstructions between you and the cell tower, the materials used in your home or office, the layout of the area you need to cover with a boosted signal, and other factors. The approximate coverage areas listed above are estimates. Actual coverage area will vary based on these and other factors. If you're not sure if a system will be powerful enough for your needs, contact us to find out.

Brand Other
Product Manual Product Manual
Product Specifications Spec Sheet
Boosting Power Strong
Condition New
Warranty 2 Years
Number of Inside Antenna(s) 1 Inside Antenna
Inside Antenna Type Omnidirectional
Outside Antenna Type Omnidirectional
Max Coverage Area Up to 20,000 sq ft
Frequency 700MHz, 800MHz, 1900MHz, 1700/2100MHz
Gain 72 dB
Impedance 50 ohm
Power Requirements Input AC110-240V, 50/60Hz Output DC 6V 3.0A
FCC Notice
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.

Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.

You May Also Want to Consider

SureCall Fusion5s 72dB Signal Booster Kit - Voice, 3G & 4G LTE - Yagi and Panel Kit
As low as $849.99
  • Best for areas where you don't need long cables and want a choice of antennas.
Strong Boosting

Strong Boosting

Most powerful multi-carrier booster available.

DIY Installation

DIY Installation

This booster is designed to be installed by the customer.

weBoost 471104 Connect 4G-X Extreme Signal Booster Kit
$899.99

There is a New Version of this Product

The weBoost Connect 4G-X has been discontinued and replaced by the new and improved weBoost Home Complete.

Go to the new Home Complete

Strong Boosting

Strong Boosting

Most powerful multi-carrier booster available.

DIY Installation

DIY Installation

This booster is designed to be installed by the customer.

SolidRF Office 4G Signal Booster Kit - Voice, 3G & 4G LTE [Discontinued]

Product Notice

The manufacturer is currently undergoing a patent challenge, so we've stopped offering this product for the time being. You should choose the SureCall Fusion5s Signal Booster Kit in place of this kit.

Go to the SureCall Fusion5s

Strong Boosting

Strong Boosting

Most powerful multi-carrier booster available.