SureCall Tri-Flex-AP Panel Kit for 3G & AT&T/US Cellular 4G LTE (CM-TRIFLEX-AP-KIT) [Discontinued]
Availability: Out of stock
The SureCall Tri-Flex-V Signal Booster Kit amplifies the 2G and 3G signals of most major carriers plus the AT&T & US Cellular 4G LTE networks.
- Boosts the AT&T & US Cellular 4G LTE signals as well as 2G & 3G on 800 MHz & 1900 MHz frequencies
- Covers an area up to 5,000 sq ft with a strong outside signal
- Boosts both voice and data communications
- Provides a strong, reliable signal inside a building
- More than 20 times the power of your cell phone alone
- Extends device battery life
- Boosts signal for multiple devices simultaneously
The SureCall Tri-Flex-AP Signal Booster Kit by Cellphone-Mate is a wireless signal booster that can amplify the 2G and 3G networks from most major carriers plus the AT&T and US Cellular 4G LTE networks. Until now, most signal boosters were either dual-band and only boosted 3G and earlier signals or they were LTE specific and only boosted the LTE signal. This amplifier combines the two and boosts both the dual-band and AT&T and US Cellular 4G LTE frequencies.
The SureCall Tri-Flex repeater features a powerful 65 dB gain which gives it a total coverage area of up to 5,000 sq ft (depending on existing outside signal strength) when paired with the included omnidirectional antenna making this the ideal amplifier for large homes and small to medium offices. Because this is a powerful amplifier, you must have a minimum of 20 ft of vertical separation between the inside and outside antennas. Adding up to 75 feet of horizontal separation can help improve the performance of this signal booster by minimizing the potential for oscillation (feedback) between the inside and outside antennas.
This kit features an inside panel antenna that works best for covering multiple floors or if you have a space that's long and narrow. If you need to boost the signal over a single story, you may be better off with the SureCall Tri-Flex-A Kit for 3G & AT&T/US Cellular 4G LTE (CM-TRIFLEX-A-KIT).
|Max Coverage Area||Up to 5,000 sq ft|
|Frequency||700MHz, 800MHz, 1900MHz|
|Specific Frequency (Up/Down)||698 - 716 MHz / 728 - 746 MHz, 824 - 849 MHz / 869 - 894 MHz, 1850 - 1910 MHz / 1930 - 1990 MHz|
|Gain||65dB / 65dB|
|Product Manual||Tri-Flex User Guide|
|Power Requirements||Input AC110V,60Hz; Output DC 6-12V; <30W|
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.