Wilson 805165 Tri-Band 4G-V Customizable Kit for 3G & Verizon 4G LTE [Discontinued]
Availability: Out of stock
As low as: $0.00
Price as configured: $0.00
The Wilson 805165 Tri-Band 4G-V has been discontinued.
Please contact us to learn about available replacement products.
The Wilson 805165 Tri-Band 4G-V amplifier is the first ever consumer wireless signal booster designed specifically for the Verizon Wireless 2G, 3G and new 4G LTE networks. Until now, most signal boosters were either dual-band and only boosted 3G and earlier signals or they were 4G LTE specific and only boosted the LTE signal which doesn't support voice calls. This amplifier combines the two so you get the lightning fast 4G LTE combined with crystal clear voice calls all in one signal booster. The amplifier's standard dual-band frequencies (850MHz Cellular and 1900MHz PCS) will boost most major cell carriers 2G and 3G networks. The additional 700MHz capability amplifies the frequencies used by Verizon's 4G LTE network.
The Wilson 805165 Tri-Band repeater for Verizon features a 70 dB gain which gives it a total coverage area of up to 10,000 sq ft (depending on existing outside signal strength) making this the ideal amplifier for large homes and small to medium offices. Because this is a powerful amplifier, you must have a minimum of 20 ft of vertical separation between the inside and outside antennas. Adding up to 75 feet of horizontal separation can help improve the performance of this signal booster by minimizing the potential for oscillation (feedback) between the inside and outside antennas.
Verizon is still in the process of deploying its new 4G LTE network. If you currently get a 3G Verizon signal, you're in luck because Verizon is adding 4G LTE to every market currently served by their 3G network. So even if you don't yet receive a Verizon LTE signal, you will soon, making this tri-band LTE booster the perfect way to ensure that you won't need to upgrade again in the near future.
More Wilson 805165 Tri-Band 4G-V Kit Options
This kit is ideal for locations with a strong outside signal or that need to support multiple carriers simultaneously. The included omnidirectional antenna is less powerful than a directional, but it can cover multiple carriers with towers in all directions.
This kit is best for locations where the existing signal strength outside is 3 or fewer bars. The included directional antenna must be aimed so this kit can only cover the carriers with towers in a single general direction. If you have carriers with towers in multiple directions, an additional outside antenna can be added, contact us for more information.
If you already have the cables and antennas and only need the amplifier, then this is the best option for you.
|Max Coverage Area||Up to 10,000 sq ft|
|Frequency||700MHz, 800MHz, 1900MHz|
|Specific Frequency (Up/Down)||776 - 787 MHz / 746 - 757 MHz, 824 - 849 MHz / 869 - 894 MHz, 1850 - 1910 MHz / 1930 - 1990 MHz|
|Gain||70dB / 70dB|
|Product Manual||Wilson Tri-Band 4G-V Signal Booster Installation Guide|
|Power Requirements||6 V, 1.5 A - 3.0 A|
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.