Wilson Mobile 4G RV Signal Booster Kit for Voice, 3G & 4G LTE [Discontinued]

The Wilson Mobile 4G RV and large vehicle Signal Booster Kit is the perfect addition for people who travel in RVs, Motorhomes, 5th-Wheels, and other large vehicles, and like to get away from it all while still being connected. The Mobile 4G RV Kit features a 5-band, 50 dB amplifier, which is the most powerful mobile system allowed by the FCC. The Mobile 4G boosts the 2G, 3G, and 4G LTE networks from all major carriers, giving you fewer dropped calls, increased call clarity, and the fastest 4G download speeds possible. Unlike less powerful signal boosters, the Mobile 4G communicates with your phone wirelessly and doesn't require any direct connection or for your phone to sit in a cradle. Additionally, because it broadcasts boosted signal to the local area, multiple phones and data devices are able to be used at the same time.

The inside coverage area that you receive from the Wilson Mobile 4G RV Kit will depend on your existing outside signal strength. In areas where you get a moderate existing outside signal, the Mobile 4G will provide a boosted signal up to 5 ft from the inside antenna. As the outside signal gets weaker, you may have to keep your phone within about 18 inches from the inside antenna, in order to take advantage of the boosted signal. To talk on the phone while moving around the vehicle, just keep your phone near the inside antenna and use a bluetooth headset for mobility. Hotspots can also be left near the inside antenna giving you the fastest internet speeds possible.

Looking to boost WiFi in your RV? Our Hawking HAW2R1 Hi-Gain Wireless-300N Smart Repeater Pro will allow you to connect to a WiFi network up to 6 times the distance away and increase the coverage area by up to 3 times.

Supported Carriers

The Wilson Mobile 4G RV Kit supports the Voice, 3G, and 4G LTE networks from all major carriers in North America. It does not support any WiMAX or iDEN networks.

• AT&T 2G, 3G, 4G HSPA+ & 4G LTE
• Verizon 2G, 3G & 4G LTE
• Sprint 2G, 3G & 4G LTE
• T-Mobile 2G, 3G, 4G HSPA+ & 4G LTE
• US Cellular 2G, 3G & 4G LTE
• All other carriers using 800 MHz, 1900 MHz, and AWS 1700/2100 MHz

Included Items

• 460108 - Wilson Mobile 4G Signal Booster Kit
• 859913 - Wilson 6V/2A DC Power Adapter
• 311133 - Wilson RV and Trucker Spring Mount Antenna with 13.5 ft. Coax Cable
• 901104 - 3-Way Mount with Spade Stud
• 301152 - Wilson Slim Low Profile Antenna with SMA-Male Connector & 10' Coax Cable

You can purchase an AC Power Supply here: Wilson 859912 AC/DC 6V Power Supply

Installation Overview

Installing the Mobile 4G kit is very easy and can usually be done in just a few minutes. Since no part of the installation is permanent, the kit can be transferred to another vehicle as needed.

To start, mount the RV Antenna on the exterior of the vehicle using the included 3-way mount, and ensure that the antenna extends above the vehicle for a clear, 360 degree view. Run the attached cable into the vehicle and connect the cable to the amplifier's Outside Antenna port. To the Inside Antenna port, connect the inside antenna cable. Locate the inside antenna near where you'll typically be using the phone, for example, by the drivers seat or near a table where you typically sit. Power on the amplifier and you should immediately start receiving boosted signal.

See the below video an overview of how the Mobile 4G is typically installed in a car.