Drive 3G-X RV Signal Booster Kit [Discontinued]

The Drive 3G-X RV and large vehicle signal booster Kit is the perfect addition for people who travel in RVs, motorhomes, 5th-Wheels, and other large vehicles, and like to get away from it all while still being connected. The Drive 3G-X RV Kit features a dual-band, 50 dB amplifier, which is the most powerful mobile amplifier system allowed by the FCC, a strong, spring mount, outside trucker antenna, and a powerful panel inside antenna, to maximize the internal coverage area. The Drive 3G-X has a more powerful uplink than the standard Drive 3G-M allowing you to get up to 60% further from the tower while still maintaining a usable cell signal.

The Drive 3G-X RV kit boosts the 2G and 3G networks from all major carriers in the United States, giving you fewer dropped calls, increased call clarity, and boosted 3G data. The Drive 3G-X will not boost the new 4G LTE networks from any carrier, so if you need the fast data from 4G LTE boosted, then you'll have to look at the Drive 4G-X Extreme RV signal booster kit. Unlike less powerful signal boosters, the Drive 3G-X RV kit communicates with your phone wirelessly and does not require a wired connection to your phone or for it to sit in a cradle to receive boosted signal. Additionally, because it broadcasts boosted signal to the local area, multiple phones and data devices are able to receive boosted signal at the same time.

The coverage area that you receive inside the vehicle from the Drive 3G-X RV Kit will depend on your existing outside signal strength. In areas where you get a moderate outside signal, the Drive 3G-X RV kit will provide a boosted signal up to 6 ft from the inside antenna. If the outside signal gets weaker, the coverage area will shrink, until you have to keep your phone within about 18 inches from the inside antenna in order to take advantage of the boosted signal. If you need a larger area to talk while inside the vehicle, just keep your phone near the inside antenna and use a bluetooth headset for greater mobility. Hotspots can also be left near the inside antenna and connected to via WiFi, giving you the fastest internet speeds possible.

Supported Carriers

The Drive 3G-X RV Signal Booster Kit supports the Voice and 3G networks from all major carriers in the United States and Canada. For other locations, please consult the frequencies listed below to see if this product will work for you.

Here is a more detailed breakdown of the carriers, networks and frequencies boosted by this kit:

• AT&T 2G, 3G & 4G HSPA+
• Verizon 2G & 3G
• Sprint 2G & 3G
• T-Mobile 2G, 3G & 4G HSPA+
• US Cellular 2G & 3G
• All other carriers using 800 MHz, 1900 MHz

Please Note: This signal booster kit will not work in most European, Asian, and African countries because the frequencies used there are different than those boosted by this equipment.

Coverage Area

Mobile signal boosters are restricted to a relatively low power to limit the chances that they could interfere with a cellular network. With a maximum gain of 50 dB, a mobile signal booster can cover about 5 ft from the inside antenna, when you have a moderate to strong existing outside signal. When you have a very weak existing outside signal, the coverage area may be limited to just a few feet around the inside antenna. For best results, we recommend leaving your phone or data device near the signal booster's inside antenna and then using a bluetooth headset for phone calls while in the RV.

Kit Includes

The Drive 3G-X RV Signal Booster Kit includes everything necessary for a standard installation, including the following:

• 470111 - weBoost Drive 3G-X Mobile Signal Booster Kit
• 304415 - RV and Trucker 4G Spring Mount Antenna with 13.5 ft. Coax Cable and Mount
• 955822 - 20 ft. RG58 Coax Cable with N-Male and SMA Male Connectors
• 311135 - Wide-Band Panel Antenna with N-Female Connector

The Drive 3G-X RV signal booster kit comes with a DC power supply.

Installation Overview

Installing the Drive 3G-X RV kit is very easy and can usually be done in just a few minutes. Since no part of the installation is permanent, the kit can be transferred to another vehicle as needed.

To start, mount the RV Antenna on the exterior of the vehicle using the included 3-way mount, and ensure that the antenna extends above the vehicle for a clear, 360 degree view. Run the attached cable into the vehicle and connect the cable to the amplifier's Outside Antenna port. To the Inside Antenna port, connect the inside antenna cable and run to the inside panel antenna, which you'll mount either on the ceiling or the wall in the location where you'll be using your mobile devices the most. Power on the amplifier and you should immediately start receiving boosted signal.