SureCall TriFlex2Go Mobile Signal Booster for 2G, 3G & 4G LTE [Discontinued]

The SureCall TriFlex2Go-T is a mobile signal booster that will boost the Voice and 3G networks from all carriers plus the 4G LTE networks from at least one carrier.  There are three TriFlex2Go amplifiers: TriFlex2Go-V will boost Verizon's 2G, 3G, and 4G LTE networks TriFlex2Go-A will boost AT&T and US Cellular's 2G, 3G, and 4G LTE networks TriFlex2Go-T will boost T-Mobile and Canadian Carriers 2G, 3G, and 4G LTE networks The SureCall TriFlex2Go is a mobile professional grade cell phone signal booster that features that fastest 4G LTE data rates and a 3 year manufacturer's warranty, the longest in the industry. The TriFlex2Go is designed for Cars, Trucks, RVs, Boats, and other vehicles and features Automatic Gain Control (AGC), which allows the amplifier to continue boosting even while the outside signal strength is constantly changing.  In addition to AGC, the TriFlex2Go also features manual gain control knobs allowing you to fine-tune the output power of the amplifier to work best in your vehicle.  The rugged metal amplifier casing helps to dissipate heat while protecting the amplifier from bumps in the road and other objects in the vehicle. The TriFlex2Go works by amplifying the existing cellular signal which comes in through the outside antenna and rebroadcasts it inside the vehicle using the included inside patch antenna. The entire process also works in reverse with the signal from your phone being boosted and sent back to the tower through the antenna on the roof. This provides you with clear two-way conversations and fast upload and download data speeds. The TriFlex2Go is FCC Certified and uses the latest carrier protection technologies including auto gain control, stealth technology that shuts off the uplink when it's not needed, and the lowest Out of Band Emissions to date. Supported Carriers The TriFlex2Go Mobile Signal Booster Kit supports the Voice and 3G networks from all major carriers in North America plus the 4G LTE networkfrom at least one carrier.  It does not support any WiMAX or iDEN networks or LTE networks from any other carriers.  The following carriers are supported: TriFlex2Go-V will boost the 2G and 3G networks from all carriers plus Verizon's 4G LTE network TriFlex2Go-A will boost the 2G and 3G networks from all carriers plus AT&T and US Cellular's 4G LTE networks TriFlex2Go-T will boost the 2G and 3G networks from all carriers plus T-Mobile and Canadian Carriers 4G LTE networks Kit Includes The TriFlex2Go kit includes everything necessary for a standard installation including the following: TriFlex2Go Amplifier 5dB magnetic roof-mount outside antenna Inside low-profile patch antenna DC Power Supply with 6 ft. cable Screw and Velcro mounting kit Installation To install, mount the outside antenna on the roof of the vehicle.  It should be as straight up and down as possible and try to keep it away from the sunroof if you have one. Pick the door that is used least often and run the cable in through the door opening. For best results, run the cable under the weather-stripping to protect the cable when the door is opened and closed. Connect the outside antenna cable to the Outside Antenna port on the amplifier.  To the inside antenna port, connect the patch antenna. The inside patch antenna should be located near where you typically use your phone, ideally within 12 inches.  Common mounting locations include the side of the drivers seat or in the center console of the vehicle.  In areas with a very weak existing outside signal, your phone may have to stay within 8 to 12 inches from the inside antenna in order to receive a usable signal.  Finally, plug in the power supply to power on the system.  Over the first few days, you may need to fine-tune the gain controls on the amplifier for best results.