Wilson Signal 3G M2M Direct-Connect Kit [Discontinued]

The Wilson M2M Direct-Connect Signal 3G Kits are the newest suite of direct connect signal booster kits from the new Wilson brand of signal boosters (formerly Wilson Electronics). The Wilson M2M Direct-Connect Signal 3G booster is, as the name implies, a machine to machine signal booster, which is perfect for situations where you have a device that needs to have boosted signal funneled directly to it, such as ATMs, remote gate openers, security systems, etc. Each kit includes everything that you need to quickly and easily install the system and begin providing your device with boosted signal, but if your device does not have an SMA connector, then you may need an additional adapter. The booster is dual-band, so it will improve voice calls and 3G data, and supports most major carriers in the United States.

You Should Choose This Kit If

You have a device or machine that requires a boosted 3G signal
The Wilson M2M Direct-Connect Signal 3G Kit is designed to receive a 3G signal from pretty much any carrier in the United States, amplify it, and pass it directly to a device or machine that needs a better 3G signal.

Coverage Area

An M2M signal booster connects directly to the device or machine that it is providing boosted signal to, so there is no coverage area created with this type of booster.

Supported Carriers

The Wilson Signal 3G Signal Booster Kit supports the 2G & 3G networks from virtually all carriers in the United States and Canada. For other locations, please consult the frequencies listed below to see if this product will work for you. This kit will not boost the 4G LTE networks from any carrier.

Here is a more detailed breakdown of the carriers, networks, and frequencies boosted by this kit:

• AT&T 2G, 3G & 4G HSPA+
• Verizon 2G & 3G
• Sprint 2G & 3G
• T-Mobile 2G & 3G
• US Cellular 2G & 3G
• All other carriers using 800 MHz & 1900 MHz

Please Note: This signal booster kit will not work in most European, Asian, and African countries because the frequencies used there are different than those boosted by this equipment.

In the Box

• Wilson M2M 15 dB Direct-Connect Amplifier
• Wilson Magnet-Mount External Antenna, either 4 in. (301126) or 12 in. (311125)
• Wilson AC or DC Hardwire Power Supply
• Wilson 3' RG174 coax cable with SMA adapters

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.

Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.